K-array Azimut Reference Manual page 2

Azimut
Reference Guide
Thank you for choosing a K-array product!
To ensure proper operation, please read this owner's manual
and safety instruction carefully before using the product.
After reading this manual, be sure to keep it for future
reference.
UNPACKING
Each K-array amplifier is built to the highest standard and
thoroughly inspected before leaving the factory. Upon arrival,
carefully inspect the shipping carton, then examine and test
your new amplifier. If you find any damage, immediately
notify the shipping company.
CONNECTING
Find the device name on the label sticked on the amplifier
bottom side (i.e. AZIMUT-1021).
Should you have any questions about your new
device please contact K-array customare service at
support@k-array.com or contact the official K-array
distributor in your country.
Check that the following parts are supplied with the product.
1x Kommander-KA02 amplifier
1x Rumble-KU44-2 subwoofer
2x Lyzard-KZ14 ultra miniaturized line-array element w/cable
1x K-Audioctrl remote control w/cable
1x Subwoofer cable
1x Power supply w/power cord
2x Line input connectors (Phoenix MC 1.5/3-G-3.81)
3x Self adhesive magnet strip
3x Double-sided bonding strip
Wired connection
On your preferred browser go to the address field and write
the path to the built in web interface (i.e. http://AZIMUT-1021).
Wi-Fi connetion
Connect your Wi-Fi device to the hotspot with the name of
your Azimut (i.e. AZIMUT-1021). On your preferred browser go
to the address field and write http://192.168.10.1
When asked, insert the password 12345678
Bluetooth
Pair your device with the Azimut.