Front Axle; Checking The Brake Lining Thickness - Yamaha LB50IIAC Service Manual

4. Remove the front axle nut.
5. Remove the front wheel axle by
simultaneously twisting and pulling out
on the axle. Then remove the wheel
assembly.
(Raise the front of the machine by plac-
ing a suitable stand under the engine.)
Front axle
Remove any corrosion from axle with emery
cloth. Then place it on a surface plate and
check for bending. If bent replace.
Checking the brake lining thickness
1. Measure the brake lining thickness.
Front brake lining thickness:
4mm
Replacement limit:
2mm
2. Remove any glazed areas from brake
shoes using coarse sand paper.
- 102 -