Yamaha LB50IIAC Service Manual page 124

6. Install the fork tubes into the
under-bracket to ease headlight body
installation.
7. Install the headlight body and stays onto
the fork tubes with all rubber and steel
spacing washers properly in place.
8. Install the upper fork bracket. Tighten
steering fitting bolt. Torque to
specification.
Steering fitting bolt torque:
21 Nm (2.1 m • kg)
9. Tighten upper fork tube bolts and torque
to specification.
Upper fork tube bolt torque:
21 Nm (2.1 m • kg)
Handlebars mounting bolt torque:
21 Nm (2.1 m • kg)
10. Install handlebars and torque to
specification.
12 Nm (1.2 m • kg)
11. Reconnect all electrical wiring and
check operation.
12. Install headlight and check operation.
13. Install front wheel.
14. Reconnect speedometer cable.
1 5. Reconnect front and rear brake and
throttle cables and check operation.
- 119 -