Clutch Assembly And Primary Gear - Yamaha LB50IIAC Service Manual

Clutch assembly and primary gear
1. Remove circlip and gear holders, then
remove the primary driven gear.
2. Install the flywheel on the crankshaft
temporarily. Then use the flywheel
holding tool to hold the flywheel.
Loosen the clutch locknut.
3. Remove 2nd gear clutch assembly.
4. Remove 1st gear clutch assembly.
-55-
i
Cirdip
2. Gear holder
3. Primary drive gear
1. Flywheel holding tool 2. Torque wrench
1. 2nd gear clutch assembly
1st gear clutch assembly