Yamaha LB50IIAC Service Manual page 121

8. Remove handle crown (upper bracket)
and instruments, as an assembly.
N O T E : - - - - - - - - - - - -
H old headlight body to keep it from fal-
ling.
9. Remove steering ring nut with steering
nut wrench.
NOTE: - - - - - - - - - - -
Support under-bracket with one hand to
hold the bracket up into the headstock
so that the loose bearings will not fall
out.
10. While still supporting the under bracket.
carefully lift off the upper bearing cover.
11. Lift off the top bearing race and remove
all of the ball bearings from the upper
bearing assembly.
Ball quantity/size: 22 pcs, 3/16 in/
12. Remove bracket while being very
careful not to lose any bearings from the
lower assembly.
Ball quantity/size: 19 pcs, 1/4 in
- 116 -
136018