Steering Head; Adjustment; Disassembly - Yamaha LB50IIAC Service Manual

STEERING HEAD
Adjustment
Refer to Chapter 2 for steering head
adjustment procedure.
Disassembly
1. After removing front forks, remove
headlight from headlight body.
2. Disconnect electrical wires between
headlight body and main wiring harness
from frame.
3. Disconnect any electrical wires between
handlebar switches and main wiring
harness in headlight body.
4. Disconnect throttle cables, front and
rear brake at handlebars.
5. Disconnect speedometer cables at
instruments.
6. Remove handlebars and put aside.
7. Remove stem fitting bolt and crown
washer.
- 115 -