Connecting 300S Softlight Led Luminaires To Ac Power - Philips 300S Operation Manual

300S Softlight LED Luminaires
3.

Connecting 300S Softlight LED Luminaires to AC Power

The unit is supplied with an AC input cable
application.
Table2 describes how to connect power to your 300S Softlight LED Luminaire Field wiring of the
LED Luminaire is straight forward A total of 3 wires conductors is supplied from the unit
The following wiring scheme is used:
Rear of Unit
CAUTION: In the event the AC input cable of t his luminaire is damaged it must be replaced with an approved
cable through an Authorized Strandlighting Dealer or Service Center
.
Table 2: 300S Softlight LED Luminaire IP20 Rated Models AC Input Connections
Wire Color
Green Yellow
AC Output
:
Figure 3 300S Softlight LED Luminaire AC Input & Output Connections
in bare end. Input connector is a user supplied accessory to fit your
/
(
Brown Main/ LIVE (100 to 240VAC)
Blue
/
Connecting 300S Softlight LED Luminaires to AC Power
Installation & User's Manual
-
.
)
Purpose
Neutral
Ground (Earth)
DC Input
AC Input
,
.
300S Softlight
.
7