Troubleshooting - Southwestern Bell GH4000 Owner's Manual

TROUBLESHOOTING

If your GH4000 is not performing to your expectations, please try
these simple steps:
Problem
Charge light won't come
on when handset is placed
in handset charger.
No dial tone.
Handset doesn't ring.
26
Suggestion
Make sure the AC Adapter is plugged
into the wall outlet.
Make sure the wall outlet is functioning.
Make sure the handset is properly seated
in the handset charger.
Make sure the rechargeable
pack is properly placed in the handset.
Make sure that the charging contacts on
the handset and on the handset are clean.
charger are clean
Charge the handset for 10 hours before
initial use.
Place the handset back into charger for 5
seconds.
Make sure the handset is fully charged.
The CHARGE LED should light when
handset is in the charger.
Make sure the Ringer volume is not set to
Ringer Off in the PROG menu.
Rechargeable battery pack may be weak
or not fully charged. Charge the battery
for 4-5 hours.
Make sure the AC adaptor is plugged into
the base unit and wall outlet
Make sure the wall outlet is functioning.
There may be too many telephones
installed on the same line. Contact your
local telephone company to determine
the maximum number of extensions for
your calling areas.
battery