Internal Call - Southwestern Bell GH4000 Owner's Manual

2.4ghz multi-handset digital spread spectrum cordless telephone with call waiting caller id
Hide thumbs Also See for GH4000:
Table of Contents

Advertisement

TELEPHONE OPERATION
into the second line. A dial pause of
3 seconds will be inserted by
pressing the REDIAL key and it
will be indicated by the character
"P". The pause can't be used as the
first character, since as the first
character it would be treated as a
REDIAL command. A Flash cannot
be generated in pre-dial mode.
2.Check that the number is correct.
The last digit can be deleted by
pressing DELETE. The entire
number can be cleared by pressing
and holding the DELETE key.
3.Press TALK key(the phone calls
the entered number)
TALK 0:00:01
7890123496322300
Post-dial
Setting up an external outgoing call
in a post-dial mode is made by.
1.Pass TALK key. The call timer
will start and 'External call' will be
shown in the display.
TALK 0:00:01
EXTERNAL CALL
2.Enter the number, which replaces
'External call' in the display.
TALK 0:00:02
9876543210
3 . T h e d i s p l a y w i l l s h o w t h e
numbers as they are entered. If the
numbers exceeds 16 digits, the
number will be shifted to the
second line.
Terminating an external
outgoing call
1.An external outgoing call is
terminated by pressing TALK or
placing the handset in the charger.
2.After terminating an external
call, the timer stops running and
'Ended' will be displayed in the
first line of the display.
ENDED 0:01:15
9876543210
3.The call will be automatically
t e r m i n a t e d i f t h e h a n d s e t
connection is lost, e.g. out of range
for 5 seconds.

Internal Call

A n i n t e r n a l c a l l i s m a d e b y
pressing INT key, followed by
handset number ('0'-'4') after which
the call timer will start running and
'Internal call' will be shown in the
display.
It is also possible to select the
handset from a list, which will
appear after pressing the INT key.
Use the UP/DOWN key to scroll
through list and then select the
handset by pressing the TALK or
PROG key.
1.Press INT.
SELECT INTERCOM
HANDSET #1
,
N a m e i s n t a s s i g n e d o n t h e
receiving handset.
SELECT INTERCOM
SOMEBODY
Internal handset name is assigned
19

Advertisement

Table of Contents
loading

Table of Contents