Table of Contents
Advertisement
INSTALLATION
Wall Mounting
The GH4000 may be mounted on a wall phone plate or onto two
screws (not included) that you fasten to the wall. For either type
of installation, complete the following steps first.
1.When using the standard wall plate, this step is not necessary.
Place the Wall bracket on the wall and mark the location of the
screws holes. Install the screws, leaving 3/16" extending out
from the wall. Use anchors to secure screws.
2.To connect the Wall Mount bracket, align the bracket with the
slots on the base until it is securely in place.
3.Insert the AC adaptor into the back of the unit.
4. Plug one end of the short telephone line cord into the TEL
LINE jack on the Base unit.
5. Thread the adaptor cord and telephone cord through the
grooves in the bracket. The cord will exit from the bottom.
DO NOT CONNECT THE AC ADAPTOR TO THE WALL POWER
OUTLET YET.
6. Plug the other end of the line cord into the wall jack.
7. Mount the base on the wall plate studs and press until the unit
locks in place.
8. Plug the AC adaptor into a standard 110/120V 60Hz AC wall
outlet.
12
Advertisement
Table of Contents
