Telephone Operation - Southwestern Bell GH4000 Owner's Manual

TELEPHONE OPERATION

This section describes how to
1.Answer an incoming external call
2 . A n s w e r a n i n t e r n a l c a l l
(intercom)
3.Make an external outgoing call
4.Make an internal call
5.Forward an incoming external
call to the other handset
6.Setup a conference call (with the
other handset and an external
party)
7.Redial (last number called)
8.Perform a Page call
9.Use the Flash function
Digital Security System
The security code prevents your
cordless telephone conversation
from being accessed by a phone on
a different line. Once the handset
b a t t e r y i s f u l l y c h a r g e d , t h e
handset will automatically select
the code from a total of over 65,000
combinations. The code is changed
every time the handset is placed in
the cradle. If you experience
difficulty with placing or receiving
calls, a lost security code may be
the cause of the problem. When
this occurs the handset can no
longer communicate with the base.
Reset by placing handset on base
for 5-10 seconds. If that does not
work, unplug the AC adaptor from
the wall outlet, disconnect the
handset battery for 5-10 seconds,
then reconnect. Replug the AC
adaptor and place handset on the
registration plug for 5-10 seconds.
95 Channel Auto Scan
Operation
The GH4000 cordless telephone
automatically searches and selects
the clearest of 95channels when it
is being used.
Making a Call
1.Lift the handset and press the
TALK button to be connected to the
phone line. "TALK" and the call
timer will be displayed.
2.After hearing a dial tone, dial the
desired number. The display will
show the dialed number.
3.If you misdial, simply press the
TALK button and begin again.
4 . A f t e r y o u r c o n v e r s a t i o n i s
competed, press the TALK button
once to disconnect the line, or
return the handset to the charger.
The IN USE LED will turn off.
Receiving a Call
When the phone rings:
1.If the handset is out of the
charger, press TALK or any button
on the keypad.
2.If the handset is in the charger,
lift the handset. Do not press the
TALK button, as you will be
connected automatically.
NOTE:
If you experience difficulty with
placing or receiving calls, a lost
security code may be the cause of
the problem. When this occurs, the
h a n d s e t c a n n o l o n g e r
17