Procedure To Use The Reset Button; Navigating The Web Configurator - ZyXEL Communications P-320W v3 User Manual

Click Go to Advanced Setup to view and configure all the P-320W v3's settings.
8
Figure 7 Choose Your Setup Mode.
Note: The management session automatically times out when the time period set in
the Administrator Inactivity Timer field expires (default five minutes). Simply
log back into the P-320W v3 if this happens.
2.3 Resetting the P-320W v3
If you forget your password or IP address, or you cannot access the web
configurator, you will need to use the RESET button at the back of the P-320W v3
to reload the factory-default configuration file. This means that you will lose all
configurations that you had previously saved, the password will be reset to "1234"
and the IP address will be reset to "192.168.1.1".

2.3.1 Procedure to Use the Reset Button

Make sure the power LED is on.
1
Press the RESET button for longer than 1 second to restart/reboot the P-320W v3.
2
Press the RESET button for longer than five seconds to set the P-320W v3 back to
3
its factory-default configurations.

2.4 Navigating the Web Configurator

The following summarizes how to navigate the web configurator from the Status
screen.
P-320W v3 User's Guide
Chapter 2 Introducing the Web Configurator
27