Log Descriptions - ZyXEL Communications P-320W v3 User Manual

Chapter 18 Logs
Table 63 Maintenance > Logs > Log Settings
LABEL
Send Log To
SMTP
Authentication
User Name
Password
Syslog Logging
Active
Syslog Server IP
Address
Log Facility
Active Log and
Alert
Log
Send Immediate
Alert
Apply
Reset
18.6 Technical Reference
This section provides some technical information about the topics covered in this
chapter.

18.6.1 Log Descriptions

This section provides descriptions of example log messages.
Table 64 System Maintenance Logs
LOG MESSAGE
Time calibration is
successful
Time calibration failed
166
DESCRIPTION
The P-320W v3 sends logs to the e-mail address specified in this field.
If this field is left blank, the P-320W v3 does not send logs via e-mail.
SMTP (Simple Mail Transfer Protocol) is the message-exchange
standard for the Internet. SMTP enables you to move messages from
one e-mail server to another.
Select the check box to activate SMTP authentication. If mail server
authentication is needed but this feature is disabled, you will not
receive the e-mail logs.
Enter the user name (up to 31 characters) (usually the user name of
a mail account).
Enter the password associated with the user name above.
The P-320W v3 sends a log to an external syslog server.
Click Active to enable syslog logging.
Enter the server name or IP address of the syslog server that will log
the selected categories of logs.
Select a location from the drop down list box. The log facility allows
you to log the messages to different files in the syslog server. Refer to
the syslog server manual for more information.
Select the categories of logs that you want to record.
Select log categories for which you want the P-320W v3 to send E-
mail alerts immediately.
Click Apply to save your changes.
Click Reset to begin configuring this screen afresh.
DESCRIPTION
The router has adjusted its time based on information
from the time server.
The router failed to get information from the time
server.
P-320W v3 User's Guide