Dhcp Server - ZyXEL Communications P-320W v3 User Manual

C
H A P T E R
8.1 Overview
DHCP (Dynamic Host Configuration Protocol, RFC 2131 and RFC 2132) allows
individual clients to obtain TCP/IP configuration at start-up from a server. You can
configure the P-320W v3's DHCP server(s) or disable it.
When configured as a server, the P-320W v3 provides the TCP/IP configuration for
the clients. If DHCP service is disabled, you must have another DHCP server on
your LAN or Guest WLAN, or else the computer must be manually configured.
8.2 What You Can Do
• Use the DHCP Server General screen
configure your DHCP server.
• Use the Static DHCP screen
v3's Static DHCP settings.
• Use the Client List screen
DHCP client information.
8.3 DHCP Server General Screen
Use this screen to enable and configure your DHCP server.
P-320W v3 User's Guide

DHCP Server

(Section 8.3 on page
(Section 8.4 on page
(Section 8.5 on page 91) to view a list of current
8
89) to enable and
91) to change your P-320W
89