Table of Contents
Advertisement
Configure centralized logs using the embedded web configurator; see online help for details.
This appendix provides descriptions of example log messages.
Table 154 System Error logs
LOG MESSAGE
%s exceeds the max. number
of session per host!
Table 155 System Maintenance Logs
LOG MESSAGE
Time calibration is
successful
Time calibration failed
DHCP client gets %s
DHCP client IP expired
DHCP server assigns %s
SMT Login Successfully
SMT Login Fail
WEB Login Successfully
WEB Login Fail
TELNET Login Successfully
TELNET Login Fail
FTP Login Successfully
FTP Login Fail
NAT Session Table is Full!
!! Phase 1 ID type mismatch
!! Phase 1 ID content
mismatch
!! No known phase 1 ID type
found
Appendix G
Log Descriptions
DESCRIPTION
This attempt to create a NAT session exceeds the maximum
number of NAT session table entries allowed to be created per
host.
DESCRIPTION
The router has adjusted its time based on information from the
time server.
The router failed to get information from the time server.
A DHCP client got a new IP address from the DHCP server.
A DHCP client's IP address has expired.
The DHCP server assigned an IP address to a client.
Someone has logged on to the router's SMT interface.
Someone has failed to log on to the router's SMT interface.
Someone has logged on to the router's web configurator
interface.
Someone has failed to log on to the router's web configurator
interface.
Someone has logged on to the router via telnet.
Someone has failed to log on to the router via telnet.
Someone has logged on to the router via ftp.
Someone has failed to log on to the router via ftp.
The maximum number of NAT session table entries has been
exceeded and the table is full.
The ID type of an incoming packet does not match the local's
peer ID type.
The ID content of an incoming packet does not match the
local's peer ID content.
The ID type of an incoming packet does not match any known
ID type.
P-335 Series User's Guide
Appendix G
455
Advertisement
Table of Contents
Troubleshooting
