JVC KD-AV7005 Service Manual page 9

3.1.3 Removing the front panel assembly
(See Figs.3 to 5)
• Remove the display unit and detach panel assembly as re-
quired.
(1) From the both sides of the main body, remove the two
screw A attaching the front panel assembly. (See Figs.3
and 4)
(2) From the bottom side of the main body, remove the FPC
cover. (See Fig.5.)
(3) Release the lock of the connector
and disconnect the card wire. (See Fig.5.)
(4) Release the joints a and remove the front panel assembly
from the main body in the direction of the arrow. (See
Fig.5.)
CN75 on the main board
Front panel assembly
A
Fig.3
Front panel assembly
A
Fig.4
Front panel assembly
a
Main board
Fig.5
Lock
a
FPC cover
CN75
(No.MA101)1-9