JVC KD-AV7005 Service Manual page 42

A
B
1-42 (No.MA101)
READ ERROR : Indication of an error history
See "4.2.6 Error code table" for details.
LOADING/EJECT mechanism error
Monitor mechanism error
Changer error
"TOTAL ERROR :zzzzzz"
Total error count
(A figure between 0 and 999999 is displayed.
"E-n :xxyyyy"
Detailed error code
Error code
Counter
"E0n :xxyyyy"
Detailed error code
Error code
Counter
CLEAR ERROR : Clear error history
The error history (LOADING/EJECT mechanism,
monitor mechanism and changer) is cleared.
The error history stored in the EEPROM is cleared.
(by writing 00h)
"COMPLETE" is displayed by a monitor after clear
was finished.
INITIALIZE : Initialize user set data
The system controller EEPROM is initialized except for the
error history.
INITIALIZE ALL : Initialize all data to the factory setting
The system controller EEPROM is initialized entirely.
MEMORY CHECK : Check indication is done with a normal screen.
(Note)
This mode not using it by service.
MONITOR : Monitor service mode
See "4.2.7~4.2.9 Monitor adjustment" for details.
MONITOR MECHA CHECK : Check mode of a monitor mechanism
(Note)
This mode not using it by service.
DEMO SET UP : Change of a demonstration mode is done.
Touch Panel Test : GUI is set in the touch panel test mode
Confirmation of a position gap of touch panel
Cancellation of this mode do long push of the
[POWER/ATT] button.
1000000 or more is also displayed as 999999.)
(First five error codes)
(Latest three error codes)