JVC KD-AV7005 Service Manual page 29

3.4.8 Removing the rod (L)(R)/roller assembly
(See Figs.15 and 16)
• Remove the top cover, the mechanism section, the front unit
and the loading arm assembly.
(1) Release the rod (L) and (R) from the joints q at the bottom
of the loading arm assembly. (See Fig.15.)
(2) Remove the roller assembly from the loading arm assem-
bly. (See Fig.16.)
(3) Remove the two collars and washer from the roller assem-
bly. (See Fig.16.)
Caution:
After attaching the loading arm assembly to the roller assem-
bly, attach the rod (L) and (R). Attach the rods to the right and
left collars of the roller assembly. (See Figs.15.)
When reattaching the rod (L) and (R) to the loading arm as-
sembly, engage each joints q as shown in Fig.15. As joints r
of the rod (L), let the rod through r before reattaching it.
Collar
Roller assembly
Rod(R)
q
q
Rod(R)
Loading arm assembly
q
Fig.15
Roller assembly
Collar
Rod(L)
Fig.16
Collar
Rod(L)
q
r
Rod(L)
q
Collar
Washer
Rod(R)
Loading arm assembly
(No.MA101)1-29