Advanced Poly-Packaging T-1000 Operation Manual page 12

DF-10 Diverting Funnel
- Mounts to bagger beneath the seal bar or the end of a takeaway
conveyor to count bags into one of two boxes. When the final bag count is reached, a diverter
redirects from Box A to Box B.
FS-10 Flat Seal Assembly
- Helps decrease / eliminate wrinkles in the seal by pulling sides
of bag. Increase bag integrity.
LS-10 Load / Support Shelf
- Provides support for heavier packages when dropped into bag.
Sizes: 10", 15", or 20" long.
LSV-10 Load Shelf Vibrator Kit
- Settles product to bottom of bag to increase volume of
product in bag. (LS-10 back plate required).
PB-20 Dual Palm Buttons
- Decrease the possibility of injury to hands and fingers. Operator
must push two buttons simultaneously to actuate seal bar.
LC-10 Light Safety Curtain
- Safety feature that prohibits seal operation when there are
obstructions in light screen. Also, toggle on the "auto cycle" feature and the seal bar
automatically activates when the light curtain field is unobstructed (trailing edge of signal).
Printpad Terminal & Scanner
- No longer is a PC required to operate a thermal transfer
printer. Alphanumeric keypad with programmable function keys, printer controls, easy-to-read
display, scanned input, and stored databases. Data can be imported directly from external
devices such as scales or other test and measurement equipment. Designed for an industrial
environment, this compact unit is sealed for protection and costs less than most PCs.
TS-10 Trim Seal Assembly
- Trims excess film from bag above seal to enhance the
appearance of the package (retail products).
Ti-1000 Thermal Transfer Inline Printer
- Print bar codes, graphics, etc. by downloading
pre-formatted labels, generated via label software. (PC or Terminal & software required)
Ti-2000 Dual Thermal Inline Printers
- Print bar codes, graphics, etc. on both front and
back of bag, directly to the surface of the bag, simultaneously with a "top & bottom" printer.
(PC or terminal & software required)
Twin-Seal
- Seal the bag a second time, 3/4" from the first seal for additional bag integrity.
TM
UF-2000 Takeaway Conveyor
- Remove the packaged product to a packing station or
directly feed a carton or table, conveying the product from floor level. The conveyor perfectly
fits underneath the T-1000 and takes the product away. Small, lightweight and equipped with
castors, use this conveyor anywhere in the plant. Designed for 24 hour / 7 days a week operation.
UF-5000 Infeed Conveyor
- Kit packaging infeed conveyor. Instead of loading parts
directly into the bag, load parts into compartments on the conveyor. Packaging kits loading the
compartments by hand or automatically with parts counters or scales.
10