Table of Contents
Advertisement
|
|
|
|
|
|
| |
|
| |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
44
InfoPrint XT Guide
[-e listings | nolistings]
Controls whether InfoPrint XT writes the listings from the
individual steps of the resource-load or resource-delete process to
STDERR. These listings can contain error information. Valid values
are:
listings
nolistings
Application programs that issue the pdxtloadres command can use
these universal values instead of the language-specific keywords:
v API:LISTINGS is the same as listings.
v API:NOLISTINGS is the same as nolistings.
[-f load | delete]
Specifies whether InfoPrint XT loads or deletes Xerox resources.
The default is that InfoPrint XT loads resources. Valid values are:
load
delete InfoPrint XT deletes Xerox resources. InfoPrint XT deletes
any position, InfoPrint XT uses the default percentage for
LIGHT, MEDIUM, or HEAVY. These are examples of
values you can specify:
-c :8:16
InfoPrint XT uses 5% coverage for LIGHT shading,
8% for MEDIUM, and 16% for HEAVY.
-c 3
InfoPrint XT uses 3% coverage for LIGHT shading,
10% for MEDIUM, and 15% for HEAVY.
-c :11
InfoPrint XT uses 5% coverage for LIGHT shading,
11% for MEDIUM, and 15% for HEAVY.
-c ::14 InfoPrint XT uses 5% coverage for LIGHT shading,
10% for MEDIUM, and 14% for HEAVY.
-c 4:9:12
InfoPrint XT uses 4% coverage for LIGHT shading,
9% for MEDIUM, and 12% for HEAVY.
Application programs that issue the pdxtloadres command
can use these universal values instead of the
language-specific keywords:
v API:SHDXRX is the same as xerox.
v API:SHDGSC is the same as grayscale.
v API:SHDGSU=[lp]:[mp]:[hp] is the same as -c
[lp]:[mp]:[hp].
Note: Restrictions apply when you use the -c option. See
page 4.
InfoPrint XT writes the listings to STDERR.
InfoPrint XT does not write the listings to STDERR. This is
the default.
InfoPrint XT loads Xerox resources. This is the default.
the information that it generated during the load process
and deletes the original Xerox resources.
Advertisement
Table of Contents
