Table of Contents
Advertisement
resource_list_name for a form resource in a format that is
not at the current level. The file does not include some
of the required information.
System action: InfoPrint XT continues processing the
job.
User response: Reload the corresponding Xerox form
to update the resource list file to the latest format and
to create the overlay again.
AIOxxx472E Overlay overlay_name does not match the
overlay available when the transform
converted resource_list_name.
Explanation: InfoPrint XT found that overlay
overlay_name has changed since the last time it was
loaded.
System action: InfoPrint XT continues processing the
job.
User response: Reload the corresponding Xerox form
to make sure that the information in the resource list
file resource_list_name matches the information in
overlay overlay_name.
AIOxxx480E Unrecognized parameter: parameter.
Explanation: InfoPrint XT did not recognize the input
parameter (parameter) as a valid parameter.
System action: InfoPrint XT ignores the parameter
and continues processing.
User response: Correct the parameter and reconvert
the job.
AIOxxx482E Incorrect numeric argument: argument.
Explanation: InfoPrint XT expected a numeric
argument in a parameter, but found a nonnumeric
argument instead.
System action: InfoPrint XT ignores the parameter
and continues processing.
User response: Correct the parameter. Do the
operation that caused the error again.
AIOxxx483W Numeric argument numeric_argument is
outside the range of permitted values.
The transform will use a value of
default_value.
Explanation: InfoPrint XT expects the parameter
(numeric_argument) for the job to be numeric. It is not
numeric, or the numeric value is too large or too small.
System action: InfoPrint XT replaces the incorrect
value with the system default value.
User response: Correct the parameter and reconvert
the job.
Appendix D. Resource utility messages and data stream converter messages: AIOxxxnnnx
AIOxxx490E The transform found a relative move in
the dot | scan direction with no
preceding absolute move on page
page_number, logical record line_number.
Explanation: Before the print position was established,
InfoPrint XT either found characters to print or relative
moves in a metacode print control record of a form.
System action: InfoPrint XT ignores the current print
control record and continues processing with the next
record.
User response: Correct the input form and rerun the
failing command.
AIOxxx491W The transform detected an attempt to
reshape graphic characters by using
nongraphic Xerox font font_name on page
page_number, logical record line_number.
Of number active fonts, font_name is
number number and no graphic fonts
were found in the active font list.
AIOxxx491W The transform detected an attempt to
reshape graphic characters by using
nongraphic Xerox font font_name on page
page_number, logical record line_number.
Of number active fonts, font_name is
number number. Active graphic fonts
include graphic_font1 (number a),
graphic_font2 (number b), and
graphic_font3 (number c).
Explanation: InfoPrint XT found a character-reshaping
metacode print control sequence in a form, but a
nongraphic font was in effect. The message either
indicates that no graphic fonts were active, or lists up
to three active graphic fonts.
System action: Processing continues, but graphics
might be missing from the output.
User response: Compare the font list in effect to the
font list expected at metacode generation. Correct the
inconsistency between the font lists and reload the
form.
AIOxxx492E A translation error occurred while
processing input character x'input_hex' at
logical record line_number. Code page
code_page did not contain EBCDIC
character x'EBCDIC_hex'. The transform
substituted a blank. The original Xerox
font was font_name.
Explanation: While processing metacode print controls
in a form, InfoPrint XT translated ASCII input character
x'input_hex' into EBCDIC character x'EBCDIC_hex'.
However, because this character is not available in code
page code_page, InfoPrint XT uses a blank in its place.
This might occur because of incorrect characters, such
131
Advertisement
Table of Contents
