Ricoh INFOPRINT XT GLD0-0025-01 Installation And User Manual page 128

5016-205 File file is empty.
Explanation: The file identified in the message exists,
but it does not contain any data.
System action: InfoPrint XT cannot process the
request.
User response: Correct the problem with the file and
enter the command again.
5016-209 An error occurred while locking file
filename (error ReturnCode). ...msg
Explanation: You entered a command, but InfoPrint
XT cannot lock the file identified in the message. The
message provides additional information about why
the file-lock action failed.
System action: InfoPrint XT cannot process the
request.
User response: Examine the file identified in the
message and correct the problem. Then, enter the
command again.
5016-210 An error occurred while reading from
fdn (error ReturnCode). ...msg
Explanation: InfoPrint XT cannot read from the file
descriptor identified in the message. The message
provides additional information about why the read
action failed.
System action: InfoPrint XT cannot process the
request.
User response: Use the information that the message
provides to correct the problem. Then, enter the
command again.
5016-211 An error occurred while writing to fdn
(error ReturnCode). ...msg
Explanation: InfoPrint XT cannot write to the file
descriptor identified in the message. The message
provides additional information about why the write
action failed.
System action: InfoPrint XT cannot process the
request.
User response: Use the information that the message
provides to correct the problem. Then, enter the
command again.
5016-220 AFP record recordnumber (offset offset) is
not valid. The structured field
introducer is not complete.
Explanation: InfoPrint XT cannot read the AFP data
stream. The introducer portion of a structured field is
not complete.
108
InfoPrint XT Guide
System action: InfoPrint XT cannot process the
request.
User response: Correct the AFP data stream. Then,
enter the command again. If you cannot determine the
cause of the problem, report this message to your
technical support representative.
5016-221 AFP record recordnumber (offset offset) is
not valid. The structured field data is
not complete.
Explanation: InfoPrint XT cannot read the AFP data
stream. Not enough data exists to satisfy the length
specified in the structured field introducer.
System action: InfoPrint XT cannot process the
request.
User response: Correct the AFP data stream. Then,
enter the command again. If you cannot determine the
cause of the problem, report this message to your
technical support representative.
5016-222 AFP record recordnumber (offset offset) is
not valid. The carriage control is 0xnn,
not 0x5A.
Explanation: InfoPrint XT cannot read the AFP data
stream. The carriage control is not correct.
System action: InfoPrint XT cannot process the
request.
User response: Correct the AFP data stream. Then,
enter the command again. If you cannot determine the
cause of the problem, report this message to your
technical support representative.
5016-230 An error occurred while creating
directory directoryname (error ReturnCode).
...msg
Explanation: InfoPrint XT cannot create the directory
identified in the message. The parent directory might
not exist or might not have the permissions required to
create the specified directory. The message provides
additional information about why the create action
failed.
System action: InfoPrint XT cannot process the
request.
User response: Examine the specified directory or
directories and correct the problem. Then, enter the
command again.
5016-231 An error occurred while changing to
directory directoryname (error ReturnCode).
...msg
Explanation: InfoPrint XT cannot change to the
directory identified in the message. The message