Table of Contents
Advertisement
System action: InfoPrint XT cannot process the
request.
User response: Correct the character and rerun the
failing command.
AIOxxx283W Undefined cluster name cl_name in
cluster database source file cls_name, line
line_number, has no current or preferred
AFP MMC trays assigned and will be
excluded from reformatted cluster
database clb_name.
Explanation: The cl_name cluster entry on record
line_number of a cluster database source file cls_name is
not meaningful because it does not reference any
current or preferred input media sources.
System action: If InfoPrint XT finds no other errors
that are more serious than this for cls_name, it writes
the reformatted cluster database to the resource library
without the undefined cluster entry.
User response: Check for any other errors that
InfoPrint XT might have found while reformatting the
cluster database.
AIOxxx283W Undefined cluster name cl_name in
cluster database source file cls_name, line
line_number, has no current or preferred
AFP MMC trays assigned.
Explanation: The cl_name cluster entry on record
line_number of a cluster database source member
cls_name is not meaningful because it does not
references any current or preferred input media
sources.
System action: Because InfoPrint XT found other,
more serious errors in cls_name, it did not write the
reformatted cluster database to the resource library.
User response: Correct the cluster database source
member and rerun the failing command.
AIOxxx284E The resource utility found no valid
cluster entries in Xerox cluster database
file_name.lib, and could not process the
resource.
Explanation: While processing Xerox cluster database
file_name.lib, InfoPrint XT did not find any cluster
entries.
System action: InfoPrint XT did not reformat the
database. If a source file was requested, InfoPrint XT
did not produce it.
User response: Verify that the Xerox cluster database
that InfoPrint XT is processing contains cluster entries,
and then reload the file.
Appendix D. Resource utility messages and data stream converter messages: AIOxxxnnnx
AIOxxx290U The resource utility could not find the
source_type source file.
Explanation: InfoPrint XT cannot find the correlation
source file or the translation source file in the
|
reformatted Xerox resource path.
System action: InfoPrint XT cannot process the
request.
User response: Report this message to your technical
support representative.
AIOxxx292U File access error with return code
return_code occurred during action
operation of file file_name in the
path_name path directory or DDNAME:
error_description
Explanation: An unidentifiable or unexpected I/O
condition occurred during processing.
System action: InfoPrint XT cannot process the
request.
User response: Report this message to your technical
support representative.
AIOxxx294W A record in file_name was longer than
the maximum record length of nn. The
transform ignored data in bytes beyond
the expected length.
Explanation: A logic error occurred while reading
from file file_name.
System action: InfoPrint XT cannot process the
request.
|
User response: Examine the file and make sure that it
|
is not corrupt. Make sure that the xcc conversion
|
parameter specified the correct type of carriage control,
|
and that the data stream conversion parameters are
|
correct. Then, do the operation that caused this error
|
again.
AIOxxx298U A program or operating system error has
occurred. Internal diagnostic
information follows:
error_info
Explanation: A logic error occurred in the resource
utility program. InfoPrint XT supplies a phase name,
diagnostic information, or both, to help identify the
problem.
System action: The process failed.
User response: Report this message to your technical
support representative.
error_info
129
Advertisement
Table of Contents
