Front Cover - wsm V3307-DI-T-E2B Workshop Manual

V3307-DI-T-E2B, WSM

(7) Front Cover

Oil Cooler
1. Remove the water pipe (2).
2. Remove the oil filter cartridge (1) and the oil cooler joint screw
(3).
3. Remove the oil cooler (4).
Tightening torque Oil cooler joint screw
(1) Oil Filter Cartridge
(2) Water Pipe
Front Cover
1. Remove the front cover (1).
(When reassembling)
• Confirm that the front cover gasket (4) set in position.
• Confirm that the liquid gasket coating surface is free of water,
dust and oil in order to maintain sealing effect.
NOTE
• Assemble the adhesive-applied parts within ten minutes.
• Apply a liquid gasket (Three Bond 1217H or equivalent) (5)
to the seam between crankcase 1 (3) and crankcase 2 (2).
Front cover
Tightening torque mounting
screw
(1) Front Cover
(2) Crankcase 2
(3) Crankcase 1
Relief Valve
1. Remove the relief valve retaining screw (5).
2. Remove the relief valve (2), the spring (3) and the packing (4).
Relief valve retaining
Tightening torque
screw
(1) Front Cover
(2) Relief Valve
(3) Spring
S-46
40 to 44 N·m
4.0 to 4.5 kgf·m
29 to 32 lbf·ft
(3) Oil Cooler Joint Screw
(4) Oil Cooler
24 to 27 N·m
7T screw 2.4 to 2.8 kgf·m
18 to 20 lbf·ft
30 to 34 N·m
10T screw 3.0 to 3.5 kgf·m
22 to 25 lbf·ft
(4) Front Cover Gasket
(5) Liquid Gasket
69 to 78 N·m
7.0 to 8.0 kgf·m
51 to 57 lbf·ft
(4) Packing
(5) Relief Valve Retaining Screw
ENGINE
W1032266
W1189218
W1081251
KiSC issued 01, 2009 A