Central Machinery 65589 Set Up And Operating Instructions Manual
  1. Manuals
  2. Brands
  3. Central Machinery Manuals
  4. Power Tool
  5. 65589
  6. Set up and operating instructions manual

Central Machinery 65589 Set Up And Operating Instructions Manual

10” drill press with laser
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
10" DRILL PRESS WITH LASER

SET uP AnD OPERATIng InSTRucTIOnS

Visit our website at: http://www.harborfreight.com
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS mAnuAL.
©
Copyright
2008 by Harbor Freight Tools
contained herein may be reproduced in any shape or form without the express written consent of
Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein. Tools required for
assembly and service may not be included.
For technical questions or replacement parts, please call 1-800-444-3353.
Revised Manual 09k
65589
®
. All rights reserved. No portion of this manual or any artwork

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 65589 and is the answer not in the manual?

Questions and answers

Related Manuals for Central Machinery 65589

Summary of Contents for Central Machinery 65589

  • Page 1: Set Up And Operating Instructions

    10” DRILL PRESS WITH LASER 65589 SET uP AnD OPERATIng InSTRucTIOnS Visit our website at: http://www.harborfreight.com Read this material before using this product. Failure to do so can result in serious injury. SAVE THIS mAnuAL. © ® Copyright 2008 by Harbor Freight Tools .

  • Page 2: Important Safety Information

    Power tool plugs must match the hazardous situation which, if outlet. never modify the plug in not avoided, could result in any way. Do not use any adapter minor or moderate injury. SKU 65589 For technical questions, please call 1-800-444-3353. Page 2...
  • Page 3 ANSI-approved and breath- injury. ing protection must be NIOSH-ap- use safety equipment. Always proved for the specific hazards in the wear eye protection. Safety equip- work area. SKU 65589 For technical questions, please call 1-800-444-3353. Page 3...
  • Page 4 Some examples of control. these chemicals are: use the power tool, accessories • Lead from lead-based paints and tool bits etc. in accordance with these instructions, taking into SKU 65589 For technical questions, please call 1-800-444-3353. Page 4...
  • Page 5 Turn the Motor (36) off off laser. Doing so will help prevent and wait until it stops spinning before accidental eyes exposure to laser attempting to remove it. beam. SKU 65589 For technical questions, please call 1-800-444-3353. Page 5...

  • Page 6: Vibration Safety

    Wear suitable gloves to reduce the vibration effects on the user. Use tools with the lowest vibration when there is a choice between dif- ferent processes. SKU 65589 For technical questions, please call 1-800-444-3353. Page 6...

  • Page 7: Extension Cords

    Plug and Outlet.) sible tool damage. (See Table A.) The smaller the gauge number of the wire, the greater the capacity of the cord. For ex- SKU 65589 For technical questions, please call 1-800-444-3353. Page 7...
  • Page 8 Underwriters Laboratories, Inc. Protect the extension cords from sharp objects, excessive heat, and Volts Alternating Current damp or wet areas. Amperes No Load Revolutions per Minute n 0 xxxx/min. (RPM) SKU 65589 For technical questions, please call 1-800-444-3353. Page 8...

  • Page 9: Specifications

    Table Support (11) and slide the before assembling or making Shaft through the opening as far as any adjustments to the tool. possible. Then thread the Crank (10) onto the end of the Elevation Shaft SKU 65589 For technical questions, please call 1-800-444-3353. Page 9...
  • Page 10 Rack (5) Screws (30) on the right side of the Head (28), locking the head in place. See Figure H, on following page. Table (15) Support Column Figure E (2) Base SKU 65589 For technical questions, please call 1-800-444-3353. Page 10...

  • Page 11: Tool Set Up

    Crank (10) to adjust the Table with your hands. Step back, and (15) height and and slide the table to push the Switch down to the OFF SKU 65589 For technical questions, please call 1-800-444-3353. Page 11...

  • Page 12: Tilting The Table

    Turn the Rack Collar clockwise to “0”. Align the key holes in the Spindle Tighten the Depth Stop Ring. Shaft (80) and the Drill Tube (78) by turning the Chuck by hand. SKU 65589 For technical questions, please call 1-800-444-3353. Page 12...

  • Page 13: Replacing The V-Belt

    Before removing the V-Belt, the belt tension must be released to allow for Insert a screwdriver in the lower-front belt removal. notch of Spring Cap (56). Hold it in SKU 65589 For technical questions, please call 1-800-444-3353. Page 13...

  • Page 14: Maintenance And Servicing

    V-Belt around top of Spindle Pulley. electrical outlet before Rotate the Pulley until the Belt is set performing any inspection or in Pulley groove. maintenance. SKU 65589 For technical questions, please call 1-800-444-3353. Page 14...

  • Page 15: Cleaning, Maintenance, And Lubrication

    , check the tightness of all mounting screws and bolts in the Base, Column and Head assemblies. Check belts for wear and replace if frayed or damaged in any way. SKU 65589 For technical questions, please call 1-800-444-3353. Page 15...

  • Page 16: Troubleshooting

    TECHNICIANS, AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO. SKU 65589 For technical questions, please call 1-800-444-3353. Page 16...

  • Page 17: Parts List

    Motor Pulley Spindle Shaft V-Belt Chuck Guard Chuck Key Knob Hex Wrench 1 Pan Screw (M5 x 12) Hex Wrench 2 Pan Screw (M5 x 10) Plug Cord Clamp Cord SKU 65589 For technical questions, please call 1-800-444-3353. Page 17...

  • Page 18: Assembly Diagram

    If product has no serial number, record month and year of purchase instead. note: Some parts are listed and shown for illustration purposes only, and are not avail- able individually as replacement parts. SKU 65589 For technical questions, please call 1-800-444-3353. Page 18...

  • Page 19: Wiring Diagram

    WIRIng DIAgRAm SKU 65589 For technical questions, please call 1-800-444-3353. Page 19...

  • Page 20: Limited 90-Day Warranty

    This warranty gives you specific legal rights and you may also have other rights which vary from state to state. 3491 Mission Oaks Blvd. • PO Box 6009 • Camarillo, CA 93011 • (800) 444-3353 SKU 65589 For technical questions, please call 1-800-444-3353. Page 20...

Table of Contents