Table of Contents
Advertisement
Using the Operation Panel
B
Press {T} or {U} to display the screen for the setting you want to change,
and then press {Enter}.
<Menu>
System Menu
The following message appears on the panel display.
<System Menu>
1.Paper Tray
C
Press {T} or {U} to display the screen for the menu item you want to
change, and then press {Enter}.
<System Menu>
2.Tray Size[*]l
5
An asterisk ("*") is indicated at the left side of the currently selected item.
<Tray Size[*]> j
*8.5x13
D
Press {T} or {U} to display the screen for the setting you want to change,
and then press {Enter}.
<Tray Size[*]> j
8.25x13
This registers the setting.
E
Repeat steps C and D to change other settings.
F
Press {On Line}.
The following message appears on the panel display.
Take Offline
Then Press Reset
G
Press {On Line}.
The On Line indicator stays off and the printer enters offline.
H
Press {Reset}.
This restarts the printer with the new settings.
Note
You can check the current menu settings by printing a configuration page.
P.99 "Printing the Configuration Page"
84
j
l
j
l
j
l
l
Advertisement
Table of Contents
