Table of Contents
Advertisement
Troubleshooting
Message
B0:Error
4
B1:Error
B3:Error
B5:Error
B6:Error
42
Description
An error has occurred in
the optional memory unit.
An error has occurred in
the standard parallel inter-
face.
The printer setting is
wrong.
An error has occurred in
the RICOH-SCRIPT2 mod-
ule.
An error has occurred in
the optional parallel inter-
face board.
Comments
Turn the printer off and on.
Then, try to print again.
Turn off the printer. Re-
move and reinstall the
memory unit and turn on
the printer. Then, try to
print again.
Turn off the printer. Re-
move the memory unit and
turn on the printer. Then,
try to print again.
Note
If you remove the mem-
ory unit, you must re-
configure the printer
driver.
the "Setup
Guide" that comes with
the printer
In this case, you might
not be able print com-
plex print jobs.
Contact your sales or ser-
vice representative.
Reset the printer using
"Menu Reset" of the "Main-
tenance" menu.
P.83
"Using the Operation Panel"
Contact your sales or ser-
vice representative.
Turn off the printer. Re-
move and reinstall the op-
tional parallel interface
board and turn on the
printer. Then, try to print
again.
Advertisement
Table of Contents
