Table of Contents
Advertisement
Using the Operation Panel
E
Press {T} or {U} to display "On", and then press {Enter}.
<Menu Protect> j
On
This registers the setting and the "Maintenance" menu appears.
F
Press {On Line}.
The "Ready" message appears on the panel display.
Removing Protection
A
Check if the On Line indicator stays on. If not, press {On Line}.
B
Press {Enter}, then {Escape}, and then {Menu}.
5
The following message appears on the panel display.
<Menu>
IPDL-C Menu
C
Press {T} or {U} to display "Maintenance", and then press {Enter}.
<Menu>
Maintenance
The following message appears on the panel display.
<Maintenance>
1.Reinstall
86
l
On Line Reset
Escape
Menu
Media
Enter
Power
Error
Data In
j
l
j
l
j
l
TFWS030E
Advertisement
Table of Contents
