Table of Contents
Advertisement
b.
Disconnect the cable from the module (2).
NOTE:
HD cameras have one connected cable. IR cameras have two connected cables.
The camera module is available using spare part number L28470-001 for HD cameras.
c.
IR camera
Detach the camera module (1) from the display enclosure. (The module is attached to the display
enclosure with double-sided adhesive.)
d.
Disconnect the cables from the sides of the module (2).
The camera module is available using spare part number L30660-001 for IR cameras.
10.
If it is necessary to replace the display panel:
a.
Use tweezers to grasp the tape at the top of the panel, and then pull the tape out from behind the
panel (1).
CAUTION:
Before positioning the display panel upside down, make sure the work surface is clear
of tools, screws, and any other foreign objects. Failure to follow this caution can result in damage
to the display panel.
Component replacement procedures
67
Advertisement
Table of Contents
Troubleshooting
