Solid-State Drive (2.5 Inch) - HP ZBook Studio x360 G5 Maintenance And Service Manual

Solid-state drive (2.5 inch)

NOTE: 2.5-inch solid-state drives are only available on models with a 4-cell battery.
Description
1 TB, SATA, TLC, 2.5-inch
256 GB, SATA, TLC, 2.5-inch
Drive bracket, touch and non-touch models
Before removing the solid-state drive, follow these steps:
1. Shut down the computer.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4. Remove the bottom cover (see
5. Remove the battery (see
Remove the solid-state drive:
1. Remove the four Phillips M2.0×2.0 screws (1) that secure the drive assembly to the computer.
2. Slide the drive away from the connector (2), and then lift the drive out of the computer (3).
40 Chapter 5 Removal and replacement procedures for authorized service provider parts
Bottom cover on page
Battery on page 33).
31).
Spare part number
L28686-001
L28687-001
L28674-001 (Bracket Kit)
L33681-001 (Hard Drive
Hardware Kit)