Table of Contents
Advertisement
3.
Remove the fan/heat sink assembly (4).
CAUTION:
the fans.
Discrete graphics models:
UMA graphics models:
Various thermal pads are used on the system board components and the heat sink sections and that service
them. See the following images for thermal pad locations.
NOTE:
The thermal material must be thoroughly cleaned from the surfaces of the fan/heat sink assembly
and the system board components each time the fan/heat sink assembly is removed. Replacement thermal
material is included with the thermal module and system board spare part kits.
56
Chapter 5 Removal and replacement procedures for authorized service provider parts
When lifting the heat sink out of the computer, be careful not to bend the arms that connect
Advertisement
Table of Contents
Troubleshooting
