Advertisement
Accessories (Optional)
Name
Spacer Unit
Black
End Plate (pair)
Black
Solder Terminal
Connector
PC Board Terminal
Retentive/One-way
Solder Terminal
Insertion Connector
Connector Stopper
Dynamic
Mother Board
for binary/decimal/hex/
extra decimal display
Static
unit
Mother Board
for 5 × 7 dot matrix
character display unit
(with spacer)
Type A
Mother Board
Type B
Connector
Type C
Coupling Spacer
Right Side
for IDEC DG Series
Left Side
Digital Switches
Cable Length Code
Specify a cable length code in place of in the Part No. of mother
board cable types A, B, and C. These cables can be used for both
dynamic and static type mother boards.
Code
01
Cable Length (mm)
100
Code
15
Cable Length (mm)
1500
Specifications
Power Voltage
12 to 24V DC ±10%
35 mA max. (red)
Binary
50 mA max. (green)
Decimal/
40 mA max. (red)
Hex/
60 mA max. (green)
Extra decimal
2-color: 60 mA max. (green)
Character
65 mA max.
Display
L: 0 to 2V
Data Input Level
H: 9 to 30V
• Binary display unit
Red or green LED: +, –, 1, decimal point
• Decimal display unit
7-segment 1-color (red or green), 2-color
Display
(red/green) LED: 0 to 9, decimal point
Character
• Hexadecimal display unit
(see Function
7-segment 1-color (red or green), 2-color
Tables)
(red/green) LED: 0 to 9, A to F, decimal point
• Extra decimal display unit
7-segment 1-color (red or green), 2-color
(red/green) LED: 0 to 9, – , –, – , = , =, decimal
point
• Binary display unit: 15 mm
• Decimal/Hex/Extra Decimal display units:
Character Height
15.2 mm (2-color: 15 mm)
• Character display unit: 17.8H × 12.7W mm
Part No.
DD9Z-FY1-B
DD9Z-W-B
DMC-1
DMC-2
DD9Z-CN1
DD9Z-ST1
4-digit
DD9Z-MB1-4
2-digit
DD9Z-MB1-2
4-digit
DD9Z-MB2-4
3-digit
DD9Z-MB2-3
2-digit
DD9Z-MB2-2
4-digit
DD9Z-MB3-4
DD9Z-JE1A
DD9Z-JE1B
DD9Z-JE1C
Black
DD9Z-FG1R-B
Black
DD9Z-FG1L-B
02
03
05
10
200
300
500
1000
20
30
40
50
2000
3000
4000
5000
DD3S
Series
• Binary display unit
+, –, 1, Latch, BL, LT, DP
• Decimal/Hex/Extra Decimal display units:
<Standard>
Binary, Latch, BL, LT, DP
Input
<Zero-suppress>
Binary, Latch, BL, LT, DP, RBI
<2-color>
Binary, Latch, BL, R/G, DP
• Character display unit: D0 to D7, Latch, BL
• Decimal/Hex/Extra Decimal display units:
Output
<Zero-suppress>
RBO output
Input Logic
Positive or negative
No. of Digits
8 digits max.
Unit
Snap fit
Combination
Panel Mounting
Snap fit
• Binary/Decimal/Hex/Extra decimal display
units
Between live and dead parts :
Dielectric
1500V DC, 1 minute
Strength
• Character display unit
Between live and dead parts :
1000V AC, 1 minute
Insulation
Between live and dead parts :
Resistance
100 MΩ min. (500V DC megger)
Vibration
Resistance
10 to 55 Hz, amplitude 0.25 mm
(damage limits)
Shock
Resistance
490 m/s²
(damage limits)
• Binary/Decimal/Hex/Extra decimal display
unit
Power terminal (normal/common modes):
±1000V
Input terminal (normal/common modes):
Noise
±1000V
Resistance
Output terminal (normal/common modes):
(operating
±500V
extremes)
(Impulse condition: Pulse width 100 ns,
• Character display unit
Fast transient burst noise
Power supply: 2 kV, Signal: 1 kV
(IEC61000-4-4 capacitive clamp)
Operating
–10 to +55°C (no freezing)
Temperature
Storage
–25 to +80°C (no freezing)
Temperature
Operating
35 to 85% RH (no condensation)
Humidity
• Binary/Decimal/Hex/Extra decimal display
unit
Power Inrush
Approx. 2.0A (Power voltage: 24V)
Current
• Character display unit
Approx. 1.0A (Power voltage: 24V)
Degree of
IP40 (IEC60529)
Protection
• Display unit: 16g
Weight (Approx.)
• End plates: 4.5g (pair)
Display Units
1 μs)
5
Advertisement
