Advertisement
DD48
Series
Modular units can be combined for up to 16 digits.
• Super bright LED
• Units can be combined together and installed into a panel
cut-out by snap fit.
• Binary and decimal display units are available.
• Easy wiring and maintenance
• LED display color: red or green
• Decimal display units are available with zero suppression
function.
• Available in positive and negative input logic types.
DD48
Input
Housing
Unit
Logic
Color
Black
Positive
Beige
Binary
Display
Black
Negative
Beige
Black
Positive
Beige
Decimal
Display
Black
Negative
Beige
Note: Specify the LED color code in place of * in the Part No.
MR: red, R: red (super bright), G: green
Accessories (Optional)
Name
Spacer Unit
Black
Black
End Plate (Pair)
Beige
Mounting Clip
Black
(Note 1)
For red LED
Long Filter
For green LED
Solder Terminal
Connector
PC Board Terminal DMC-5
Mother Board
Binary/Decimal/
for 4 digits (with
Character Display
connectors)
Type A
Connector for
Type B
Mother Board
Type C
Note 1: Used for mounting four units or more.
Note 2: Specify a cable length code in place of in the Part No.,
referring to the table below.
Cable Length Code for Mother Board
Code
0.5
Cable Length (mm)
500
1000
Note: Input connector types
DD48-JE1A: Flat cable connector for direct mounting on
PC boards
DD48-JE1B: Flat cable connector conforming to MIL
Standard
DD48-JE1C: None (soldering, etc)
Display Units
Part No.
DD48-F01PB * DC24
DD48-F01PZ * DC24
DD48-F01NB * DC24
DD48-F01NZ * DC24
DD48-F31PB * DC24
DD48-F31PZ * DC24
DD48-F31NB * DC24
DD48-F31NZ * DC24
Part No.
DD48-FY1-B
DD48-W-B
DD48-W-Z
DD48-KT1
DD48-P16R
DD48-P16G
DMC-4
DD48-MB1-4
DD48-JE1A (Note 2)
DD48-JE1B (Note 2)
DD48-JE1C (Note 2)
1
2
3
4
5
2000
3000
4000
5000
Specifications
Power Voltage
24V DC ±10%
Power Consumption
Binary: 0.9W
(Approx.)
Decimal: 2.0W
Operating Temperature
–10 to +55°C (no freezing)
Storage Temperature
–25 to +80°C (no freezing)
Operating Humidity
35 to 85% RH (no condensation)
L: 0 to 2V
Data Input
H: 12 to 30V
• Binary display unit
red or green LED display: –
Display Character
• Decimal display unit
7-segment red or green LED:
0 to 9, decimal point
Character Height
• Binary display unit: 2.5 mm
(Approx.)
• Decimal display unit: 25.4 mm
• Binary display unit:
–, Latch, and Blank inputs
Input
• Decimal display unit:
Binary-coded, Latch, DP, and RBI
inputs
Output
• Decimal display unit: RBO output
Input Logic
Positive or negative
No. of Digits
16 digits max.
Unit Combination
Snap fit
Panel Mounting
Snap fit
Degree of Protection
IP40 (IEC 60529)
Display unit: 50g
Weight (Approx.)
End plates: 20g (pair)
Note: It is recommended to use a long filter when combining 9 to
16 digits.
19
Advertisement
