DD48
Display Units
Series
Connector for Mother Board
Three types of connectors (with cable) are available for the mother board. The connector on the mother board has a strain relief to protect
the insulation displacement connection from external force.
For Direct Connection to PC Board
DD48-JE1A
Cable Marking
Mother Board
Gray Cable
Data Input
Connector
Mother Board
For Connection to Connector Header
DD48-JE1B
Cable Marking
Mother Board
Gray Cable
Data Input
Connector
Mother Board
For Soldering Connection to PC Board or Others
DD48-JE1C
Cable Marking
Mother Board
Color-coded
Cable
Data Input
Connector
Mother Board
Note: Specify a cable length code (0.5: 500 mm, 1: 1000 mm, 2: 2000 mm, 3: 3000 mm, 4: 4000 mm, 5: 5000 mm) in place of
24
[Input Side Connector]
Flat cable connector for direct connection to PC board
Dimensions
Input Side
Connector
44.56
Marking
2.54
35.56
[Input Side Connector]
MIL flat cable connector (with strain relief)
IDEC's JE1S-301 (with strain relief)
Input Side
Dimensions
Connector
Marking
42.67
35.56
1.27
[Input Side Connector]
Not provided (soldering, etc.)
Flat Cable
36.83
1.27
38.10
(Name)
(Terminal No.)
(Color-coded Cable)
(Cable Color)
4 kink pins each
on both sides
0.3
0.5
Terminal Arrangement (Bottom View)
Marking
Cable Marking
Side
<Applicable Connector Header>
IDEC's JE1H-301 (Right Angle)
±0.2
IDEC's JE1H-302 (Straight)
Terminal Arrangement (Bottom View)
±0.2
2.54
3.81
Marking
Material
Conductor
Insulator
PC Board Drilling Layout
35.56
±0.08
2.54
ø0.8min
Decimal
Binary
Binary
Decimal
Marking
Decimal
Binary
Binary
Decimal
Marking
AWG28 (7 cores/0.127mm)
Tinned annealed copper wire
Heat-resisting vinyl
Decimal
Binary
Cable Marking
in the Part No.