Table of Contents
Advertisement
Windows XP, Windows Server 2003:
A A A A
Open the [Printers and Faxes] window from the [Start] menu.
The [Printers and Faxes] window appears.
B B B B
Click the icon of the machine you want to use. On the [File] menu, click
[Properties]. The printer properties appear.
C C C C
Click the [Ports] tab, and then click [Configure Port].
The [Port Configuration] dialog box appears.
• For TCP/IP, timeout setting can be configured.
Note
❒ If no settings on the [Recovery/Parallel Printing] tab are available, follow
the procedure below.
A
Click [Cancel] to close the [Port Configuration:] dialog box.
B
Start SmartDeviceMonitor for Client, and then right-click the Smart-
DeviceMonitor for Client icon on the taskbar.
C
Click [Extended Features Settings], and then select the [Set Recovery/Par-
allel Printing for each port] check box.
D
Click [OK] to close the [Extended Features Settings] dialog box
• User, proxy, and timeout settings can be configured for IPP.
Reference
For information about these settings, see"Using SmartDeviceMonitor for
Client", Network Guide, or SmartDeviceMonitor for Client Help.
Using the SmartDeviceMonitor for Client Port
2
33
Advertisement
Table of Contents
Troubleshooting
