Setting Ohp Transparencies - Ricoh Type 3260 Printer Reference

Getting Started

Setting OHP transparencies

Note
1 ❒ For colour printing, do not use
OHP transparencies that have eas-
ily melted surface.
❒ Insert OHP transparencies in the
K direction.
❒ We recommend that you use a
4000ANSI lumen or brighter over-
head projector to project OHP
transparencies.
❒ Paper settings can also be set using
the printer driver. The following
procedures are not necessary
when setting paper sizes using the
printer driver.
❒ Paper size settings set using the
printer driver have priority over
those set using the machine's dis-
play panel.
❒ When the printer driver is not
used, make settings using the dis-
play panel.
Reference
For printer driver settings, see the
printer driver Help.
18
A A A A
Press the { { { { User Tools/Counter} } } } key
on the control panel.
B B B B
Press [System Settings].
C C C C
Press the [Tray Paper Settings] tab.
D D D D
Press [T T T T Next] to scroll through the
list.
E E E E
Press [Paper Type: Bypass Tray].
F F F F
Select [OHP] or [Translucent].
G G G G
Press [OK].
The paper type selected is dis-
played.
H H H H
Press the { { { { User Tools/Counter} } } } key.
Note
❒ The settings made will remain
valid until they are reset again.
After printing on OHP trans-
parencies or thick paper, make
sure to clear settings for the next
user.