Ricoh Type 3260 Printer Reference page 146

Appendix
Messages/Second messages
Data Storage Error
Driver Setting Error (Memory) There is an error in the down-
Duplex has been cancelled.
Ethernet board has a problem. An error has occurred in the
8
Exceeded max. capacity of
document server. Cannot
store.
Exceeded max. capacity of
system file. Cannot print PDF
file(s).
Exceeded max. number of
files of document server. Can-
not store.
Exceeded max. number of
pages of document server.
Cannot store.
Exceeded max. pages. Collate
is incomplete.
140
Causes
Sample print, locked print, or
accessing the document server
was attempted without the
hard disk installed, or the hard
disk is damaged.
loaded font(s).
Insufficient memory or memo-
ry settings for the printer driv-
er may not match memory
actually installed.
Duplex printing has been can-
celed.
Ethernet board.
Hard disk drive capacity ex-
ceeded storing to the Docu-
ment Server.
File system capacity is full,
and the PDF file cannot be
printed.
The maximum number of files
stored in the Document Server
has been exceeded.
The maximum number of pag-
es stored in the Document
Server has been exceeded.
The maximum number of pag-
es has been exceeded for colla-
tion.
Solutions
Contact your sales or service
representative.
Reset the parameter for down-
loading fonts.
Specify correct memory capac-
ity on the [Change Accesso-
ries...] tab in the RPCS printer
driver.
To print the image correctly,
increase memory capacity, or
reduce resolution image.
Check the paper used is suita-
ble for duplex printing. Or, in-
crease memory capacity.
When installing a memory
module in the machine, con-
tact your sales or service rep-
resentative.
Turn off the main power
switch, and back on again. If
the message appears again,
contact your sales or service
representative.
Delete some files stored in the
Document Server or decrease
the file size to be downloaded.
Delete unnecessary files from
the hard disk.
Delete some files stored in the
Document Server.
Delete some pages stored in
the Document Server or de-
crease the number of pages to
be downloaded.
Turn off the main power
switch, and back on again. Re-
duce the number of pages to
be printed. If the message ap-
pears again, contact your sales
or service representative.