Ricoh Type 3260 Printer Reference page 148

Appendix
Messages/Second messages
Parallel I/F board has a problem. An error has occurred in the
PDF file error. Cannot print.
PDF file printing is not al-
lowed. Cannot print.
PDF password is incorrect.
Cannot print.
Print Overrun
Punch has been cancelled.
Staple has been cancelled.
The print job has been can-
celled because capture file(s)
could not be stored: Exceeded
max. memory.
The print job has been can-
8
celled because capture file(s)
could not be stored: Exceeded
max. number of files.
The print job has been can-
celled because capture file(s)
could not be stored: Exceeded
max. number of pages per
file.
DToner is almost empty.
Turn the main power switch
off then on.
USB has a problem.
142
Causes
parallel interface board.
The PDF file cannot be printed
due to syntax error.
An attempt was made to print
a restricted document.
The entered password does
not match that set for printing
encrypted documents.
The image data has been
thinned out due to image com-
pression.
Punch has been canceled.
Staple printing has been can-
celed.
An HDD overflow error has
occurred when storing cap-
ture file(s).
The maximum number of
stored capture files has been
exceeded.
The maximum number of
stored capture pages has been
exceeded.
The toner has almost run out.
The IEEE 802.11b interface
unit may have come off, or an
error may have occurred in the
IEEE 802.11b interface unit.
An error has occurred in the
USB interface.
Solutions
Contact your sales or service
representative.
Check the PDF file for errors.
The PDF file cannot be printed.
Enter the correct password.
Increase memory capacity.
When installing a memory
module in the machine, con-
tact your sales or service rep-
resentative.
Check the paper feed direc-
tion, paper orientation, and
punch position.
Check the paper feed direc-
tion, paper orientation and
stapling position.
Delete some files stored in the
Document Server or reduce
the size of files to be printed.
Delete some files stored in the
Document Server.
Delete some files stored in the
Document Server or reduce
the size of files to be printed.
Replace the toner cartridge
with a new one.
Turn off the main power
switch, and check the IEEE
802.11b interface unit is in-
stalled correctly. If the mes-
sage appears again, contact
your sales or service repre-
sentative.
Turn off the main power
switch, and back on again. If
the message appears again,
contact your sales or service
representative.