Ducati XDIAVEL Owner's Manual page 61

Selecting the Riding Mode
Press CONFIRM MENU button (4) to view the menu
for selecting the Riding Mode (A). The instrument
panel displays the speed indication (on the RH side)
and displays riding mode name (on the LH side):
- SPORT
- TOURING
- URBAN
One of them will be marked to indicate the last
memorised condition that is currently active.
For the marked Riding Mode, instrument panel
always displays information concerning some of the
associated parameters:
- engine power (ENGINE): ENGINE lettering
followed by set engine power (HIGH, MED,
LOW);
- ABS system: ABS lettering followed by the set
calibration level (1, 2, 3) in case ABS is active or
followed by OFF in case ABS is disabled.
- DTC system: DTC lettering followed by the set
level (1, 2, 3, 4, 5, 6, 7, 8) in case DTC is active or
followed by OFF in case DTC is disabled.
60
Any time CONFIRM MENU button (4) is pressed, the
selected riding mode is highlighted together with the
associated parameters (A, Fig. 22).
Once the desired riding mode (A, Fig. 22) is
highlighted, confirm the selection by holding down
the CONFIRM MENU button (4) for 2 seconds: the
new riding mode selection is stored and the standard
screen (C, Fig. 22) is displayed for the selected riding
mode.
Once the desired riding mode is highlighted, if the
CONFIRM MENU button (4) is not pressed within 5
seconds, the new riding mode selection is not stored
and the standard screen is displayed.