Ducati XDIAVEL Owner's Manual page 211

Smartphone
To pair a Smartphone, the pairing procedure with the
Bluetooth control unit requires user to enter a code
(0000), which is only necessary the first time the
device is paired with the Bluetooth control unit.
In this case, during the pairing the display shows the
PIN to be entered "INSERT PIN ON SMARTPHONE:
0000".
As soon as the user enters the PIN on the
Smartphone, the device is paired and indicated in the
list on the left.
GPS navigation system
If you wish to pair a Bluetooth Navigator, the pairing
procedure is completed on the navigator, by selecting
on the latter the connection with the motorcycle
Bluetooth control unit.
In this case, during the pairing the display shows the
message "CONNECT ON NAVI" that disappears when
the connection between the control unit and the
navigator is completed, and the name of the navigator
is indicated in the list on the left.
210
Note
If user does not complete the pairing procedure
on the Navigator within 90 seconds, pairing screen on
instrument panel will go out, and display will go back
to Bluetooth Setting Menu main screen.
If the navigator pairing is active for more than 90
seconds and so there have been errors in the
procedure, it is not possible to select the detected
devices. It is only possible to press on EXIT to abort
the procedure if deemed necessary.
Once the pairing is completed, the name of the paired
device is shown in the device list on the left: only the
first characters of the device name are displayed.
Pairing deactivation takes place when quitting the
Bluetooth Setting Menu or when no more Bluetooth
devices are detected.