Toyota TUNDRA Manual page 621

Tire related term
Cord separation
Cracking
CT
Extra load tire
Groove
Innerliner
Innerliner separation
Intended outboard
sidewall
Light truck (LT) tire
Load rating
Maximum load rating
Maximum permissible
inflation pressure
Measuring rim
The parting of cords from adjacent rubber
compounds
Any parting within the tread, sidewall, or inner-
liner of the tire extending to cord material
A pneumatic tire with an inverted flange tire
and rim system in which the rim is designed
with rim flanges pointed radially inward and
the tire is designed to fit on the underside of
the rim in a manner that encloses the rim
flanges inside the air cavity of the tire
A tire designed to operate at higher loads and
at higher inflation pressures than the corre-
sponding standard tire
The space between two adjacent tread ribs
The layer(s) forming the inside surface of a
tubeless tire that contains the inflating medium
within the tire
The parting of the innerliner from cord material
in the carcass
(a) The sidewall that contains a whitewall,
bears white lettering, or bears manufac-
turer, brand, and/or model name molding
that is higher or deeper than the same
molding on the other sidewall of the tire, or
(b) The outward facing sidewall of an asym-
metrical tire that has a particular side that
must always face outward when mounted
on a vehicle
A tire designated by its manufacturer as pri-
marily intended for use on lightweight trucks
or multipurpose passenger vehicles
The maximum load that a tire is rated to carry
for a given inflation pressure
The load rating for a tire at the maximum per-
missible inflation pressure for that tire
The maximum cold inflation pressure to which
a tire may be inflated
The rim on which a tire is fitted for physical
dimension requirements
9-1. Specifications
Meaning
621
9