Toyota TUNDRA Manual page 576

Hide thumbs Also See for TUNDRA:

Table of Contents

8-2. Steps to take in an emergency

Stowing the flat tire, jack and all tools

Vehicles with aluminum wheels: Remove the center wheel orna-

ment by pushing from the reverse side.

Lay down the tire with the valve

stem facing up and install the

holding bracket, inserting the

claw into the wheel lug nut hole.

Turn the jack handle extension

clockwise to take up slack in

Then, check to ensure the claw is

in the wheel lug nut hole and the

holding bracket is centered in the

Holding bracket

While raising, secure the tire, tak-

ing care that the tire goes straight

up without catching on any sur-

rounding part, to prevent it from

flying forward during a collision or

sudden braking.

Tightening torque:

34.7 ft·lbf (46.6 N·m, 4.8 kgf·m)

Chapters

Table of Contents