Toyota TUNDRA Manual page 129

Driving position memory
Your preferred driving position (the position of the driver's seat, steer-
ing wheel and outside rear view mirrors) can be recorded and recalled
by pressing a button.
Two different driving positions can be recorded into memory.
■
Recording procedure
1
Check that the shift lever is in P.
2
Turn the engine switch to the "ON" position.
3
Adjust the driver's seat, steering wheel, and outside rear view
mirrors to the desired positions.
4
While pressing the "SET"
button, or within 3 seconds
after the "SET" button is
pressed, press button "1" or
"2" until the buzzer sounds.
If the selected
already been preset, the previ-
ously recorded position will be
overwritten.
■
Recall procedure
1
Check that the shift lever is in P.
2
Turn the engine switch to the "ON" position.
3
Press one of the buttons for
the driving position you want
to recall until the buzzer
sounds.
3-3. Adjusting the seats
button has
129
3