Toyota TUNDRA Manual page 420

420
6-1. Using the air conditioning system
■
Change the airflow mode
To change the airflow, press
Air outlets are adjusted each time the button is pressed.
■
Other functions
● Switching between outside air and recirculated air modes
(→P. 421)
● Defogging the windshield (→P. 421)
● Defogging the back window (CrewMax models) (→P. 421)
● Defogging the outside rear view mirrors (if equipped) (→P. 421)
● Windshield wiper de-icer (if equipped) (→P. 422)
Using by automatic mode
1
Press
2
Adjust the temperature setting.
3
To stop the operation, press
■
Automatic mode indicator
If the fan speed setting or air flow modes are operated, the auto-
matic mode indicator goes off. However, automatic mode for func-
tions other than that operated are maintained.
■
Adjusting the temperature for driver and passenger seats sep-
arately ("SYNC" mode)
The air conditioning system switches between individual and simul-
taneous mode each time
Simultaneous mode (the indicator on
The driver's side temperature control dial can be used to adjust the
temperature for driver's and front passenger's side. At this time,
operate the front passenger's side temperature control dial to enter
individual mode.
Individual mode (the indicator on
The temperature for the driver's and front passenger's side can be
adjusted separately.
.
.
.
is pressed.
is on):
is off):