Toyota TUNDRA Manual page 186

186
4-1. Before driving
Positions for towing hitch receiver
1
Hitch receiver pin hole position:
46.4 in. (1179 mm)
Connecting trailer lights
Use the wire harness stored in the rear end of the vehicle.
The tow lighting system is designed for 64 watts/5 amps of electrical
current per side (right and left) for the trailer brake/turn light functions.
Please contact your Toyota dealer with any questions or concerns.
Vehicles without towing pack-

age
■
Service connector for towing brake controllers (vehicles without an
installed trailer brake controller)
Your vehicle is equipped with a service
connector for supplemental trailer brake
controllers.
Please consult your dealer on how to
access the service connector.
Vehicles with towing package
