Making A Call - Toyota TUNDRA Manual

Hide thumbs Also See for TUNDRA:

Table of Contents

5-9. Bluetooth

Making a call

Once a Bluetooth

using the following procedure:

Display the phone screen. (→P. 370)

Select the "Dial Pad" tab and enter a phone number.

To delete the input phone number, select

For the first digit, you can enter "+" by selecting "∗" for a while.

Dialing from the contacts list

You can dial a number from the contact data imported from your cellu-

lar phone. The system has one contact for each registered phone. Up

to 2500 contacts may be stored in each contact. (→P. 372)

Display the phone screen. (→P. 370)

Select "Contacts" tab.

Choose the desired contact to call from the list.

Choose the number and then press the

wheel or select

When the contact is empty

You can transfer the phone numbers in a Bluetooth

Operation methods differ between PBAP (Phone Book Access Profile)

compatible and PBAP incompatible Bluetooth

phone does not support either PBAP or OPP (Object Push Profile)

service, you cannot transfer contacts.

For PBAP compatible Bluetooth

When "Automatic Transfer" is set to on (→P. 386)

Check that a confirmation screen is displayed when the opera-

tion is complete.

Transfer the contact data to the system using a Bluetooth

phone is registered, you can make a call

switch on the steering wheel or select

switch on the steering

phone to the sys-

phones. If the cellular

Table of Contents