Quality Assurance And Standards - Salicru SPS 750 ADV R User Manual

3. QUALITY ASSURANCE AND STANDARDS.

3.1. sTaTemenT by The managemenT.
our goal is customer satisfaction, therefore this management
has decided to establish a Quality and environment Policy,
through the implementation of a Quality and environmental
management System that will enable us to comply with the
requirements demanded in the
also by our Customers and Stakeholders.
Likewise, the management of the company is committed to
the development and improvement of the Quality and environ-
mental management System, through:
Communication to the entire company of the importance of
•
satisfying both the client's requirements as well as legal
and regulatory requirements.
The dissemination of the Quality and environment Policy
•
and the setting of the Quality and environment objectives.
Conducting reviews by the management.
•
Providing the necessary resources.
•
3.2. sTandards.
The SPS AdvAnCe R and SPS AdvAnCe T are designed, man-
ufactured and sold in accordance with Quality management
Standard EN ISO 9001. The
with eC directives through the application of the following
standards:
2014/35/EU. - Low voltage safety.
•
2014/30/EU. - electromagnetic Compatibility - emC-.
•
2011/65/EU. - Restriction of the use of hazardous substances
•
in electrical and electronic equipment (RohS).
According to the specifications of the harmonized standards.
Reference standards:
EN-IEC 62040-1. Uninterruptible Power Supplies -UPS-. Part
•
1-1: general and safety requirements for UPS used in user
access areas.
EN-IEC 60950-1. Information technology equipment. Safety.
•
Part 1: general requirements.
EN-IEC 62040-2. Uninterruptible Power Supplies -UPS-. Part
•
2: emC requirements.
The manufacturer is not liable in case of modification or
intervention on the equipment by the user.
WARNING!:
SPS.AdvAnCe R 0.75..1.5 kvA and SPS.AdvAnCe T
0.85..3 kvA. These are category C2 UPSs. In residen-
tial environments, this product may cause radio inter-
ference, in which case the user must take additional
measures.
These devices should not be used with basic life sup-
port (bLS) applications, where a power failure can
render the life support equipment out of service or
significantly affect its safety or effectiveness. It is also
not recommended in medical applications, commercial
transport, nuclear installations, or other applications or
loads, where a failure of the product can lead to per-
sonal or material damages.
6
ISO 9001 and ISO 14001 and
marking indicates conformity
The eC declaration of conformity of the product is avail-
able to the customer upon express request to our head-
quarters.
3.3. environmenT.
This product has been designed to respect the environment and
manufactured according to ISO
Recycling of the equipment at the end of its useful life:
our company undertakes to use the services of authorized and
regulatory companies to treat the set of products recovered at
the end of their useful life (contact your distributor).
Packaging:
for the recycling of the packaging there must be compliance
with the legal requirements in force, according to the specific
regulations of the country where the equipment is installed.
Batteries:
batteries pose a serious danger to health and the environment.
The disposal of them shall be carried out in accordance with
the laws in force.
14001.
SALICRU