Optional Extras - Salicru SPS 750 ADV R User Manual

Model
SPS 850 ADV T
SPS 1000 ADV T
SPS 1500 ADV T
SPS 2000 ADV T
SPS 3000 ADV T
SPS 1000 ADV T (B1)
SPS 1500 ADV T (B1)
SPS 2000 ADV T (B1)
SPS 3000 ADV T (B1)
Tab. 2. SPS ADVANCE T standardised models.

4.4. opTional exTras.

depending on the configuration chosen, the device may include
any of the following options:
4.4.1. isolation transformer:
The isolation transformer provides galvanic isolation in order
to completely isolate the output from the input and/or change
neutral mode.
The placement of an electrostatic screen between the primary
and secondary windings of the transformer provides a high
level of electrical noise attenuation.
The isolation transformer can be physically placed at the input
or output of the UPS depending on the technical conditions of
the whole system (device supply voltage and/or load voltage,
characteristics or their type, etc.).
In any event, it will always be supplied as a peripheral compo-
nent external to the device itself in a separate box.
4.4.2. Communication card.
The UPS features a slot at the rear for inserting one of the fol-
lowing communication cards.
4.4.2.1. Integration into computer networks using an SnmP adapter.
Large computer systems based on LAns and wAns that inte-
grate servers in different operating systems must provide the
system manager with ease of control and administration. This
facility is obtained through an SnmP adapter, which is univer-
sally supported by the main software and hardware manufac-
turers.
Connection of the UPS to the SnmP is internal while that of
the SnmP to the computer network is made through a RJ45 10
base connector.
4.4.3. extendable guide kits for mounting in a rack cabinet (only in
sps advanCe r models).
An extendable and unique guide kit is available for all SPS
AdvAnCe R device models, valid for any kind of rack-type
cabinet.
12
Type Input/output type
Single-phase / Single-phase.
SALICRU