Placing Originals
Note
❒ Take care to place originals only af-
ter any correction fluid and ink has
completely dried. Not taking this
precaution could cause marks on
the exposure glass that will be cop-
ied onto paper.
Reference
For original sizes you can set, see
p.17 "Originals" .
Original Orientation
You can set the original orientation in
the following ways.
This function is useful for copying
torn or large originals.
Note
❒ Originals should normally be
aligned to the rear left corner.
However, some copy functions
may produce different results de-
pending on the orientation of the
originals. For details, see the expla-
nations of each function.
Originals
ADF
Placing Originals on the
Exposure Glass
A
Lift the exposure glass cover or
ADF.
❒ Do not lift the exposure glass
❒ Be sure to lift the exposure glass
B
Place the original face down on
the exposure glass. It should be
aligned with the rear left corner.
Exposure
glass
1.
Positioning mark
set11EE
2.
Left scale
❒ Start with the first page to be
C
set23EE
Lower the exposure glass cover or
ADF.
Important
cover or ADF forcefully. If you
do, the ADF cover might open
or be damaged.
Note
cover or ADF by more than 30°.
Otherwise, the size of the origi-
nal might not be detected cor-
rectly.
Note
copied.
Placing Originals
2
AAI025S
19