Troubleshooting; If Your Machine Does Not Operate As You Want - Ricoh Aficio IS 2315 Operating Instructions Manual

If Your Machine Does Not Operate As You
Want
The following chart gives explanations of common problems and messages. If
other messages appear, follow the instructions displayed.
Problem
" " ap-
Please wait.
pears.
The display is off.
Nothing happens when the
operation switch is turned
on.
The user code entry dis-
play appears.
Misfeeds occur frequently.
An error message remains,
even if misfed paper is re-
moved.
You forgot your key opera-
tor code.
"
Max. number of
* " appears.
sets is

5. Troubleshooting

Causes
This message appears
when you turn on the oper-
ation switch or change the
toner bottle.
The machine is in Energy
Saver mode.
The operation switch is
turned off.
The main power switch is
turned off.
Users are restricted by user
management.
The tray's side fences may
not be locked.
The tray's end fence may
not be set properly.
You may have loaded pa-
per of a size not shown on
the paper size selector.
When a misfeed message
appears, it remains until
you open and close the cov-
er, as required.
—
The number of copies ex-
ceeds maximum copy
quantity.
Solutions
Wait for the machine to get ready.
Turn on the operation switch.
Turn on the main power switch.
Enter the user code (up to eight dig-
its), and then press the {OK} or {#}
key.
Check the side fences are locked.
p.59 "Changing the Paper Size".
Check the end fence is set properly.
See p.59 "Changing the Paper Size".
When using paper of a size that can-
not be detected automatically, use
Tray Paper Settings to set the paper
size. See p.38 "Tray Paper Size: Tray
1" and p.78 "Copy Paper".
Clear misfed paper, and then open
and close the front cover. See p.57
"x Clearing Misfeeds".
Contact your service representative.
You can change the maximum copy
quantity. See p.42 "Max. Number of
Sets" .
49